Hyperbaric Oxygen Therapy conducted in a personal hyperbaric Chamber has proven to deliver good success in the cases of patients suffering from chronic illnesses like autism, Alzheimer's disease, stroke, air embolism, cerebral palsy, ulcers, diabetes and a variety of other debilitating physical Battery Impact Test Chamber conditions that can be caused by limited oxygen supply to the different areas of the body. The patient suffering from any of these situations can undergo hyperbaric oxygen therapy under the strict guidance of a physician and trained test managers.
This therapy is conducted by making the person take a nap, or sit in an polymer-bonded Chamber, the pressure inside which is gradually increased by the administration of pure oxygen. While a personal hyperbaric Chamber or monoplace Chamber can be used in houses , nor require trained professionals to be handled, multiplace Chamber s are made to accommodate more than one patient at a time for simultaneous treatment. Personal hyperbaric Chamber s are safe and have adequate fire precaution safeguard measures that are implemented into its design. However, before investing in one, it is best to ensure that it has certain accessories that facilitate in the patient's comfort. Here is a list of some such items.
An air conditioning unit plays an important role in effective setting up of a hyperbaric Chamber. Not only does it reduce the arctic reading of the air that is flowing into the Chamber by almost 40 degrees, but also controls the quality of dampness within it by decreasing the water content in the atmosphere. Moreover, the motor operates softly, and is not a source of hindrance to the patient.
An oxygen cleaner with a rust inhibitor can be used in the case of oxygen products that are kept under questionable. The cleaner is made primarily for industrial use and is non-toxic in nature. It is also biodegradable.
This particular cooler is customized for utilization in Dives. It helps in decreasing the newly arriving air's temperature by almost 30 degrees. It also lowers the water content within the Chamber, thereby preventing patients from feeling uncomfortable with the rising dampness levels. The best part is that it does not require any external source of energy, or electricity to work properly. All that needs to be done for these filtration systems to operate is that they should be filled with ice and water on a regular and timely basis.
This is a relatively new accessory, and is a combination of the silencer and cooler. It is a small and lightweight device that is attached between the Chamber and compressor. It helps to reduce the noise level of the inflowing air stream and reduce its high temperatures as well. It is a simple device that greatly enhances the satisfaction of the patients.
Microban is a highly concentrated disinfectant that helps in killing HIV-1 and MRSA microorganisms. It has properties of a fungicide, mildewstat, bactericide, and virucide all put together in one concentrated mixture, and is very effective for maintaining the sanitation and hygiene in a hyperbaric Chamber.
The fluctuating pressure levels during the process of compressing and decompressing a hyperbaric Chamber may cause much discomfort to some patients. It is for them that this particular accessory has been designed. These ear attaches have an in-built pressure regulator that can alter the feelings in the ear according to the changing pressure flows in the system. These include worn all through a session and even for quarter-hour after it is over. They help prevent and control the impact of pressure change that is experienced by the middle ear. These attaches are also throw away, or can be worn for four consecutive sessions before being removed.
They are also used to stabilize the pressure at the center ear, specifically by using air. They are used prior to the session to ensure that the ear can adjust normally to the data compresion and decompression of the Chamber. In other cases, equalizers are used following a session to assist the patient's ear to regain its normal balance, and thereby reduce the feeling of discomfort. These include prescribed by the doctor and are available in both multiplace and monoplace Chamber s.
This is a customized bar that is an easy task to install and use. It is designed to assist patients in entering and leaving Chamber s. Grab bars are generally made of aluminum that has a fine coating of powdered.
These are necessary for lubricating the zippers of personal hyperbaric Chamber s and ensure their smooth functioning. Lubricants such as ZipTech assist in this purpose. It is important that the zippers function efficiently to reduce the risks of accidents and problems.
The percentage of oxygen in background air is 21%. When it is condensed in a portable hyperbaric Chamber with the pressure ranging between 1. 3 to 1. 5 ATA, then the percentage increases to 27%. By using a mask and a concentrator, patients can breathe in 95% oxygen. However, the right to use concentrators is not granted to every model of personal hyperbaric Chamber s by the FDA. Hence, it is best to conduct a survey of models on this accessory and check on the permission of the company to avoid any legal issues that might occur after purchasing an unauthorized model.
Platforms help out with the movement process into and out of the Chamber. Moreover, there is ample room beneath them for the accommodation of the compressor. These include made of aluminum with a powdered layer. The platforms often have rails and steps that facilitate the movement.
This revolutionary product has been approved by the FDA and is used to measure the quality of oxygen in the blood before and following a particular session in hyperbaric Chamber. It is a fingertip pulse-oximeter that has a neck band, carrying case and double pack of double A batteries.
While choosing a personal hyperbaric Chamber, therefore, it is important to pay attention to these additional accessories as they greatly facilitate in patient comfort and safety.